This technical information has been contributed by
Dayton Rogers

Click on Company Name for a Detailed Profile

How to Design Metal Stampings
Things We've Learned From Years Making Metal Stampings

8. Definition and Limits of Extruded Holes

An extruded hole is formed by punching a smaller hole and then flanging the sides.

R = Outer radius D = Inner diameter
H = Flange height T = Material thickness

Metal Stamping Definition and Limits of Extruded Holes

This technical information has been contributed by
Dayton Rogers

Click on Company Name for a Detailed Profile

back | table of contents | forward


Home |  About Us |  Back To Technical Library |  Contact Us
Copyright © 1996-2017 JobShop.com. All Rights Reserved.
General or Technical Questions? E-mail support@JobShop.com