Industrial Gears

Straight Bevel Gears Straight teeth with coniflex or conventional bearing Pitches as coarse as 2.5 diametral, with ratios from 1:1 to 1:10 Face widths up to 3.5" maximum Ferrous or non-ferrous materials Integral shafts, ground or unground, can be splined threaded or keyed Gear sets run at any angle Heat treated or non-heat treated

Helical Gears Internal or external Up to 24" maximum external diameter Up to 15" maximum internal diameter Right or left hand helix angles in all sizes Guideless helical shaping Crown hobbing Shaved or unshaved teeth With integral shaft or bored, with keys, splined or plain Ferrous or non-ferrous materials, including bronze Heat treated or non-heat treated

Spur Gears External or internal types Up to 24" maximum external diameter Up to 15" maximum internal diameter Pitches from 3 to 32 Crown hobbing Shaved or unshaved teeth With integral shaft or bored, with keys, splined or plain Ferrous or non-ferrous materials, including bronze Heat treated or non-heat treated

Worms & Worm Gears WORMS: All types in single or multiple thread Worms as coarse as 1 circular pitch or as fine as 20 Ax. D.P. Worm outside diameters up to 6" and worm lengths up to 12" Integral shaft or shell type with ground or unground, plain splined, or keyed bore Ground or milled finishes Ferrous or non-ferrous materials Heat treated or non-heat treated WORM GEARS: Worms as coarse as 1 circular pitch or as fine as 20 Ax. D.P. Worm gears up to 24" O.D. Ferrous or non-ferrous materials, including bronze and composite blanks Heat treated or non-heat treated