This technical information has been contributed by
Insaco Incorporated

Click here to find suppliers

Machinable Ceramic Materials - Tungsten Carbide

PROPERTY UNITS VALUE
 Mechanical    
 Density gm/cc 12
 Hardness Knoop 1500
 Tensile Strength kpsi -
 Modulus of Elasticity psi x 106 90
 Flexural Strength kpsi -
 Compressive  Strength kpsi 580
 Poisson's Ratio - 0.24
 Fracture Toughness MPa m1/2 -
 Electrical    
 Dielectric Strength ac volts/mil -
 Dielectric Constant (at 1 MHz) -
 Volume Resistivity ohm-cm2/cm 2.5x10-8
 Thermal    
 Coefficient of
 Thermal Expansion
x10-6/°C 6
 Thermal Conductivity W/m°K 42
 Specific Heat cal/g°C -
 Max Working Temp °C -
 Shock Resistance °C diff. -
All properties are at room temperature unless otherwise noted.

Engineering data are representative, and are not intended as absolute nor warrantable. Manufacturer’s Data shown is blended from multiple sources and therefore illustrates the marketplace.

This technical information has been contributed by
Insaco Incorporated

Click here to find suppliers


Home |  About Us |  Back To Technical Library |  Contact Us
Copyright © 1996-2017 JobShop.com. All Rights Reserved.
General or Technical Questions? E-mail support@JobShop.com