This technical information has been contributed by
Ace Wire Spring & Form Company, Inc.

Click on Company Name for a Detailed Profile

Garter Springs Specifications

Garter Spring

Garter spring ends may be fastened together by interlocking loops, staking one coil of the female end into the rib end, soldering (for belt applications) or by screwing one end into the other.

Regardless of the connecting joint used, its strength must be such that the joint will not separate when the spring is extended to its maximum diameter.


Specifications for Garter Springs

In Ordering Give The Following Information As Completely As Possible:

This technical information has been contributed by
Ace Wire Spring & Form Company, Inc.

Click on Company Name for a Detailed Profile

Home |  About Us |  Back To Technical Library |  Contact Us
Copyright © 1996-2010 JobShop.com. All Rights Reserved.
General or Technical Questions? E-mail support@JobShop.com