![]() |
This technical information has been contributed by
Tech-Etch Inc.
Click here to find suppliersEMI/RFI Shielding Types
Shielding Strips Shielding strips are designed for a wide variety of application requirements. They are available in strips ranging from 16 to 24 inches in length, in continuous coils up to 35 feet long, as single fingers, or cut to requested full-finger lengths. Special modifications can be made to suit your requirements.
Uncompressed heights of standard finger stock range from .03" to .44", which will occupy gaps as low as .01". Many gaskets are offered in two material thicknesses to meet diverse application compression requirements: "Standard" and "TF", which requires less force to compress the gasket to its operating range.
MORE ON EMI/RFI SHIELDING STRIPS
Mesh Gaskets Knitted wire mesh can be used as economical gaskets for EMI shielding. knitted mesh configurations are supplied on spools, coils or cut to length as individual gaskets with or without end seals. Standard profiles for a wide variety of applications are round, round with tail, double round with tail, half round (D) and rectangular.
Most profiles are available as all mesh and all are available with an elastomer core to enhance compression characteristics and increase the deflection range. Standard wire materials are monel, TCS (tin plated copper clad steel) stainless steel and aluminum. Consult the factory for other materials. Wire selection should take into account attenuation potential, mechanical characteristics, and corrosion resistance.
MORE ON MESH GASKET EMI/RFI SHIELDING
Board Level Shielding - Photoetched Custom Designs The photoetching process allows the fabrication of board level shielding parts with complex shapes and features that are impossible to duplicate by other methods without expensive tooling.
MORE ON BOARD LEVEL EMI/RFI SHIELDING
This technical information has been contributed by
Tech-Etch Inc.
Click here to find suppliers
Click on Company Name for a Detailed Profile
|
Home | About Us | Back To Technical Library | Contact Us |
Copyright © 1996-2010 JobShop.com. All Rights Reserved. General or Technical Questions? E-mail support@JobShop.com |