Tapped stampings are stampings that are formed with threaded holes. Typical capabilities include:
- Up to 3 Tapped Holes per Part
- Tap Size Ranging from 00-80 to 1/4-20"
- UNF, UNC or Metric
- Right or Left Hand Thread
- Cut or Roll Formed Thread
- With or Without Extrusion
- 2 to 3 Threads per Hole Typical
|Home | About Us | Back To Technical Library | Contact Us|
Copyright © 1996-2010 JobShop.com. All Rights Reserved.
General or Technical Questions? E-mail support@JobShop.com