This technical information has been contributed by
Dayton Rogers

Click on Company Name for a Detailed Profile

How to Design Metal Stampings
Things We've Learned From Years Making Metal Stampings

4. Definition of Punched Holes

Identification of these punch holes can provide the basis for determining the inspection parameters.

Roll-over is the natural consequence of:

1. The punching process.
2. The mechanical properties of the material being punched.
3. The die application of techniques employed.

Metal Stamping Definition of Punched Holes

This technical information has been contributed by
Dayton Rogers

Click on Company Name for a Detailed Profile

back | table of contents | forward


Home |  About Us |  Back To Technical Library |  Contact Us
Copyright © 1996-2010 JobShop.com. All Rights Reserved.
General or Technical Questions? E-mail support@JobShop.com